Cleaning and maintenance should be natural things for every 3D printer lover. Like any machine, it needs to be working correctly to deliver your demands.
After all, nothing is more annoying than an error occurring in the middle of printing, right? Namely, every 3D printer is different, but here are some general tips that apply to just about every printer.
Why are Cleaning and Maintenance essential for 3D Printer?
With regular cleaning of the 3D printer, it is always ready to use and lasts longer. However, for proper maintenance, cleaning alone is often not enough. It is undeniably essential to check the correct functioning of the axes and take a look at the defined print profile before the process starts.
Otherwise, errors may occur. In addition, the 3D printer must be checked regularly for correct calibration and correct settings on offset.
To improve the printing experience, you should also always look for firmware updates, always with essential and enhanced updates.
How To Clean and Care For Your 3D Printer
Lubrication
Like a car engine, many moving metal parts can stop if you don’t keep the rods and bearings from locking. In this way, sewing machine oil, for example, works well. Just a drop or two on the rails and rods. Other types of lubricants may work – make sure they can be used safely with plastic. But don’t overdo it. Too much grease can spoil 3D prints as it attracts dust and dirt.
Clean the extrusion nozzle
Clogs can directly affect the quality of your 3D printed products. Even a small obstruction can disrupt the design or make the part less structurally sound.
Therefore, the extrusion nozzle must be part of the cleaning process of the 3D printer. However, this is only needed here every three months. To do this, remove the fan and fan and use a damp brush to remove filament residue from the extruder.
For the hotend, the 3D printer manufacturer sometimes provides its cleaning tools. If they are not available, you can use a precision needle or a new filament to remove the old one, for example.
Correct environment
The most crucial aspect of the long life of your 3D printer is the environment in which it is located. Preference is given to an office environment where dust, dirt, and other environmental factors do not directly affect the printer.
Furthermore, the ambient temperature is also important for the 3D printer. One between 21°C and 24°C gives the best printing results and extends the life of the 3D printer.
Wrapping Up
From this article, you got an idea – How To Clean And Maintain A 3d Printer. If you have any questions, comment below.
Comments
Post a Comment